PHP 7.4.0RC4 Released!

# preg_match

(PHP 4, PHP 5, PHP 7)

preg_match正規表現によるマッチングを行う

preg_match ( string $pattern , string $subject [, array &$matches [, int $flags = 0 [, int $offset = 0 ]]] ) : int pattern で指定した正規表現により subject を検索します。 ### パラメータ pattern 検索するパターンを表す文字列。 subject 入力文字列。 matches matches を指定した場合、検索結果が代入されます。$matches[0] にはパターン全体にマッチしたテキストが代入され、 $matches[1] には 1 番目のキャプチャ用サブパターンにマッチした 文字列が代入され、といったようになります。 flags flags には以下のフラグを指定できます。 PREG_OFFSET_CAPTURE このフラグを設定した場合、各マッチに対応する文字列のオフセットも返されます。 これは、matches の値を配列に変更することに注意してください。 その配列のすべての要素は、 オフセット 0 で一致した文字列、 およびその文字列のオフセット 1 での subject へのオフセットからなります。  <?phppreg_match('/(foo)(bar)(baz)/', 'foobarbaz',$matches, PREG_OFFSET_CAPTURE);print_r($matches);?>  上の例の出力は以下となります。 Array ( [0] => Array ( [0] => foobarbaz [1] => 0 ) [1] => Array ( [0] => foo [1] => 0 ) [2] => Array ( [0] => bar [1] => 3 ) [3] => Array ( [0] => baz [1] => 6 ) )  offset 通常、検索は対象文字列の先頭から開始されます。 オプションのパラメータ offset を使用して 検索の開始位置を (バイト単位で) 指定することも可能です。 注意: offset を用いるのと、 substr($subject, $offset)preg_match()の対象文字列として指定するのとは 等価ではありません。 これは、pattern には、 ^,$(?<=x) のような言明を含めることができるためです。 以下を比べてみてください。

 <?php$subject = "abcdef";$pattern = '/^def/';preg_match($pattern,$subject, $matches, PREG_OFFSET_CAPTURE, 3);print_r($matches);?> 

Array
(
)


 <?php$subject = "abcdef";$pattern = '/^def/';preg_match($pattern, substr($subject,3), $matches, PREG_OFFSET_CAPTURE);print_r($matches);?> 

Array
(
[0] => Array
(
[0] => def
[1] => 0
)

)


### 返り値

preg_match() は、pattern が指定した subject にマッチした場合に 1 を返します。 マッチしなかった場合は 0、エラーが発生した場合は FALSE を返します。

この関数は論理値 FALSE を返す可能性がありますが、FALSE として評価される値を返す可能性もあります。 詳細については 論理値の セクションを参照してください。この関数の返り値を調べるには ===演算子 を 使用してください。

### 変更履歴

バージョン 説明
5.3.6 offsetsubject よりも長いときに FALSE を返すようになりました。
5.2.2 名前つきサブパターンで、 (?<name>)(?'name') といった構文が (?P<name>) のほかに使えるようになりました. 以前のバージョンでは (?P<name>) しか使えませんでした。

### 例

 <?php// パターンのデリミタの後の "i" は、大小文字を区別しない検索を示すif (preg_match("/php/i", "PHP is the web scripting language of choice.")) {    echo "A match was found.";} else {    echo "A match was not found.";}?> 

 <?php/* パターン内の \b は単語の境界を示す。このため、独立した単語の *  "web"にのみマッチし、"webbing" や "cobweb" のような単語の一部にはマッチしない */if (preg_match("/\bweb\b/i", "PHP is the web scripting language of choice.")) {    echo "A match was found.";} else {    echo "A match was not found.";}if (preg_match("/\bweb\b/i", "PHP is the website scripting language of choice.")) {    echo "A match was found.";} else {    echo "A match was not found.";}?> 

 <?php// get host name from URLpreg_match('@^(?:http://)?([^/]+)@i',    "http://www.php.net/index.html", $matches);$host = $matches[1];// get last two segments of host namepreg_match('/[^.]+\.[^.]+$/', $host,$matches);echo "domain name is: {$matches[0]}\n";?>  上の例の出力は以下となります。 domain name is: php.net  例4 名前つきサブパターンの使用法  <?php$str = 'foobar: 2008';preg_match('/(?P<name>\w+): (?P<digit>\d+)/', $str,$matches);/* PHP 5.2.2 (PCRE 7.0) 以降ではこの形式でも動作しますが、 * 過去との互換性を考慮して上の形式のほうを推奨します */// preg_match('/(?<name>\w+): (?<digit>\d+)/', $str,$matches);print_r($matches);?>  上の例の出力は以下となります。 Array ( [0] => foobar: 2008 [name] => foobar [1] => foobar [digit] => 2008 [2] => 2008 )  ### 注意 ヒント ある文字列が他の文字列内に含まれているかどうかを調べるためだけに preg_match() を使うのは避けた方が良いでしょう。 strpos() 関数を使うほうが速くなります。 ### 参考 add a note ### User Contributed Notes 46 notes 803 force at md-t dot org 8 years ago  Simple regexRegex quick reference[abc] A single character: a, b or c[^abc] Any single character but a, b, or c[a-z] Any single character in the range a-z[a-zA-Z] Any single character in the range a-z or A-Z^ Start of line$     End of line\A     Start of string\z     End of string.     Any single character\s     Any whitespace character\S     Any non-whitespace character\d     Any digit\D     Any non-digit\w     Any word character (letter, number, underscore)\W     Any non-word character\b     Any word boundary character(...)     Capture everything enclosed(a|b)     a or ba?     Zero or one of aa*     Zero or more of aa+     One or more of aa{3}     Exactly 3 of aa{3,}     3 or more of aa{3,6}     Between 3 and 6 of aoptions: i case insensitive m make dot match newlines x ignore whitespace in regex o perform #{...} substitutions only once 
85
MrBull
8 years ago
 Sometimes its useful to negate a string. The first method which comes to mind to do this is: [^(string)] but this of course won't work. There is a solution, but it is not very well known. This is the simple piece of code on how a negation of a string is done:(?:(?!string).)?: makes a subpattern (see http://www.php.net/manual/en/regexp.reference.subpatterns.php) and ?! is a negative look ahead. You put the negative look ahead in front of the dot because you want the regex engine to first check if there is an occurrence of the string you are negating. Only if it is not there, you want to match an arbitrary character.Hope this helps some ppl. 
59
cebelab at gmail dot com
9 years ago
 I noticed that in order to deal with UTF-8 texts, without having to recompile php with the PCRE UTF-8 flag enabled, you can just add the following sequence at the start of your pattern: (*UTF8)for instance : '#(*UTF8)[[:alnum:]]#' will return TRUE for 'é' where '#[[:alnum:]]#' will return FALSEfound this very very useful tip after hours of research over the web directly in pcre website right here : http://www.pcre.org/pcre.txtthere are many further informations about UTF-8 support in the libhop that will help!--cedric 
25
ruakuu at NOSPAM dot com
9 years ago
 Was working on a site that needed japanese and alphabetic letters and needed to validate input using preg_match, I tried using \p{script} but didn't work:<?php$pattern ='/^([-a-zA-Z0-9_\p{Katakana}\p{Hiragana}\p{Han}]*)$/u'; // Didn't work?>So I tried with ranges and it worked:<?php$pattern ='/^[-a-zA-Z0-9_\x{30A0}-\x{30FF}' .'\x{3040}-\x{309F}\x{4E00}-\x{9FBF}\s]*$/u';$match_string = '印刷最安 ニキビ跡除去 ゲームボーイ';if (preg_match($pattern, $match_string)) { echo "Found - pattern$pattern";} else {    echo "Not found - pattern $pattern";}?>U+4E00–U+9FBF KanjiU+3040–U+309F HiraganaU+30A0–U+30FF KatakanaHope its useful, it took me several hours to figure it out.  35 arash dot hemmat at gmail dot com 8 years ago  For those who search for a unicode regular expression example using preg_match here it is:Check for Persian digitspreg_match( "/[^\x{06F0}-\x{06F9}\x]+/u" , '۱۲۳۴۵۶۷۸۹۰' );  41 mohammad40g at gmail dot com 8 years ago  This sample is for checking persian character:<?php preg_match("/[\x{0600}-\x{06FF}\x]{1,32}/u", 'محمد');?>  17 yofilter-php at yahoo dot co dot uk 6 years ago  There does not seem to be any mention of the PHP version of switches that can be used with regular expressions. preg_match_all('/regular expr/sim',$text). The s i m being the location for and available switches (I know about) The i is to ignore letter cases (this is commonly known - I think) The s tells the code NOT TO stop searching when it encounters \n (line break) - this is important with multi-line entries for example text from an editor that needs search. The m tells the code it is a multi-line entry, but importantly allows the use of ^ and $to work when showing start and end. I am hoping this will save someone from the 4 hours of torture that I endured, trying to workout this issue.  19 daevid at daevid dot com 10 years ago  I just learned about named groups from a Python friend today and was curious if PHP supported them, guess what -- it does!!!http://www.regular-expressions.info/named.html<?php preg_match("/(?P<foo>abc)(.*)(?P<bar>xyz)/", 'abcdefghijklmnopqrstuvwxyz',$matches);   print_r($matches);?>will produce: Array( [0] => abcdefghijklmnopqrstuvwxyz [foo] => abc [1] => abc [2] => defghijklmnopqrstuvw [bar] => xyz [3] => xyz)Note that you actually get the named group as well as the numerical keyvalue too, so if you do use them, and you're counting array elements, beaware that your array might be bigger than you initially expect it to be.  10 ulli dot luftpumpe at murkymind dot de 7 years ago  Matching a backslash character can be confusing, because double escaping is needed in the pattern: first for PHP, second for the regex engine<?php//match newline control character:preg_match('/\n/','\n'); //pattern matches and is stored as control character 0x0A in the pattern stringpreg_match('/\\\n/','\n'); //very same match, but is stored escaped as 0x5C,0x6E in the pattern string//trying to match "\'" (2 characters) in a text file, '\\\'' as PHP string:$subject = file_get_contents('myfile.txt');preg_match('/\\\'/',$subject); //DOESN'T MATCH!!! stored as 0x5C,0x27 (escaped apostrophe), this only matches apostrophepreg_match('/\\\\\'/',$subject);  //matches, stored as 0x5C,0x5C,0x27 (escaped backslash and unescaped apostrophe)preg_match('/\\\\\\\/',$subject); //also matches, stored as 0x5C,0x5C,0x5C,0x27 (escaped backslash and escaped apostrophe)//matching "\n" (2 characters):preg_match('/\\\\n/','\\n');preg_match('/\\\n/','\\n'); //same match - 3 backslashes are interpreted as 2 in PHP, if the following character is not escapeable?>  sainnr at gmail dot com 8 years ago  This sample regexp may be useful if you are working with DB field types. (?P<type>\w+)($|$$(?P<length>(\d+|(.*)))$$)For example, if you are have a such type as "varchar(255)" or "text", the next fragment<?php   $type = 'varchar(255)'; // type of field preg_match('/(?P<type>\w+)($|$$(?P<length>(\d+|(.*)))$$)/', $type,$field);   print_r($field);?>will output something like this:Array ( [0] => varchar(255) [type] => varchar [1] => varchar [2] => (255) [length] => 255 [3] => 255 [4] => 255 )  10 solixmexico at outlook dot com 3 years ago  To validate directorys on Windows i used this:if( preg_match("#^([a-z]{1}\:{1})?[\\\/]?([\-\w]+[\\\/]?)*$#i",$_GET['path'],$matches) !== 1 ){    echo("Invalid value");}else{    echo("Valid value");}The parts are:#^ and $i Make the string matches at all the pattern, from start to end for ensure a complete match.([a-z]{1}\:{1})? The string may starts with one letter and a colon, but only 1 character for eachone, this is for the drive letter (C:)[\\\/]? The string may contain, but not require 1 slash or backslash after the drive letter, (\/)([\-\w]+[\\\/]?)* The string must have 1 or more of any character like hyphen, letter, number, underscore, and may contain a slash or back slash at the end, to have a directory like ("/" or "folderName" or "folderName/"), this may be repeated one or more times.  ian_channing at hotmail dot com 8 years ago  When trying to check a file path that could be windows or unix it took me quite a few tries to get the escape characters right.The Unix directory separator must be escaped once and the windows directory separator must be escaped twice.This will match path/to/file and path\to\file.exepreg_match('/^[a-z0-9_.\/\\\]*$/i', $file_string);  30 jonathan dot lydall at gmail dot removethispart dot com 11 years ago  Because making a truly correct email validation function is harder than one may think, consider using this one which comes with PHP through the filter_var function (http://www.php.net/manual/en/function.filter-var.php):<?php$email = "someone@domain .local";if(!filter_var($email, FILTER_VALIDATE_EMAIL)) { echo "E-mail is not valid";} else { echo "E-mail is valid";}?>  akniep at rayo dot info 10 years ago  Bugs of preg_match (PHP-version 5.2.5)In most cases, the following example will show one of two PHP-bugs discovered with preg_match depending on your PHP-version and configuration.<?php$text = "test=";// creates a rather long textfor ($i = 0;$i++ < 100000;)    $text .= "%AB";// a typical URL_query validity-checker (the pattern's function does not matter for this example)$pattern    = '/^(?:[;\/?:@&=+$,]|(?:[^\W_]|[-_.!~*$$) ])|(?:%[\da-fA-F]{2}))*/'; var_dump( preg_match( pattern, text ) );?>Possible bug (1):=============On one of our Linux-Servers the above example crashes PHP-execution with a C(?) Segmentation Fault(!). This seems to be a known bug (see http://bugs.php.net/bug.php?id=40909), but I don't know if it has been fixed, yet.If you are looking for a work-around, the following code-snippet is what I found helpful. It wraps the possibly crashing preg_match call by decreasing the PCRE recursion limit in order to result in a Reg-Exp error instead of a PHP-crash.<?php[...]// decrease the PCRE recursion limit for the (possibly dangerous) preg_match callformer_recursion_limit = ini_set( "pcre.recursion_limit", 10000 );// the wrapped preg_match callresult = preg_match( pattern, text );// reset the PCRE recursion limit to its original valueini_set( "pcre.recursion_limit", former_recursion_limit );// if the reg-exp fails due to the decreased recursion limit we may not make any statement, but PHP-execution continuesif ( PREG_RECURSION_LIMIT_ERROR === preg_last_error() ){ // react on the failed regular expression here result = [...]; // do logging or email-sending here [...]} //if?>Possible bug (2):=============On one of our Windows-Servers the above example does not crash PHP, but (directly) hits the recursion-limit. Here, the problem is that preg_match does not return boolean(false) as expected by the description / manual of above.In short, preg_match seems to return an int(0) instead of the expected boolean(false) if the regular expression could not be executed due to the PCRE recursion-limit. So, if preg_match results in int(0) you seem to have to check preg_last_error() if maybe an error occurred.  12 luc _ santeramo at t yahoo dot com 10 years ago  If you want to validate an email in one line, use filter_var() function !http://fr.php.net/manual/en/function.filter-var.phpeasy use, as described in the document example :var_dump(filter_var('bob@example.com', FILTER_VALIDATE_EMAIL));  21 Yousef Ismaeil Cliprz 6 years ago  Some times a Hacker use a php file or shell as a image to hack your website. so if you try to use move_uploaded_file() function as in example to allow for users to upload files, you must check if this file contains a bad codes or not so we use this function. preg matchin this function we useunlink() - http://php.net/unlinkafter you upload file check a file with below function. <?php/** * A simple function to check file from bad codes. * * @param (string) file - file path. * @author Yousef Ismaeil - Cliprz[at]gmail[dot]com. */function is_clean_file (file){ if (file_exists(file)) { contents = file_get_contents(file); } else { exit(file." Not exists."); } if (preg_match('/(base64_|eval|system|shell_|exec|php_)/i',contents)) { return true; } else if (preg_match("#&\#x([0-9a-f]+);#i", contents)) { return true; } elseif (preg_match('#&\#([0-9]+);#i', contents)) { return true; } elseif (preg_match("#([a-z]*)=([\\'\"]*)script:#iU", contents)) { return true; } elseif (preg_match("#([a-z]*)=([\\'\"]*)javascript:#iU", contents)) { return true; } elseif (preg_match("#([a-z]*)=([\'\"]*)vbscript:#iU", contents)) { return true; } elseif (preg_match("#(<[^>]+)style=([\\'\"]*).*expression\([^>]*>#iU", contents)) { return true; } elseif (preg_match("#(<[^>]+)style=([\\'\"]*).*behaviour\([^>]*>#iU", contents)) { return true; } elseif (preg_match("#</*(applet|link|style|script|iframe|frame|frameset|html|body|title|div|p|form)[^>]*>#i", contents)) { return true; } else { return false; }}?>Use<?php// If image contains a bad codesimage = "simpleimage.png";if (is_clean_file(image)){ echo "Bad codes this is not image"; unlink(image);}else{ echo "This is a real image.";}?>  15 corey [works at] effim [delete] .com 10 years ago  I see a lot of people trying to put together phone regex's and struggling (hey, no worries...they're complicated). Here's one that we use that's pretty nifty. It's not perfect, but it should work for most non-idealists. *** Note: Only matches U.S. phone numbers. *** <?php // all on one line... regex = '/^(?:1(?:[. -])?)?(?:\((?=\d{3}$$))?([2-9]\d{2})(?:(?<=$$\d{3})$$)? ?(?:(?<=\d{3})[.-])?([2-9]\d{2})[. -]?(\d{4})(?: (?i:ext)\.? ?(\d{1,5}))?$/'; // or broken up $regex = '/^(?:1(?:[. -])?)?(?:$$(?=\d{3}$$))?([2-9]\d{2})' .'(?:(?<=$$\d{3})$$)? ?(?:(?<=\d{3})[.-])?([2-9]\d{2})' .'[. -]?(\d{4})(?: (?i:ext)\.? ?(\d{1,5}))?$/'; ?> If you're wondering why all the non-capturing subpatterns (which look like this "(?:", it's so that we can do this: <?php $formatted = preg_replace($regex, '($1)$2-$3 ext.$4', $phoneNumber); // or, provided you use the$matches argument in preg_match $formatted = "($matches[1]) $matches[2]-$matches[3]"; if ($matches[4])$formatted .= " $matches[4]"; ?> *** Results: *** 520-555-5542 :: MATCH 520.555.5542 :: MATCH 5205555542 :: MATCH 520 555 5542 :: MATCH 520) 555-5542 :: FAIL (520 555-5542 :: FAIL (520)555-5542 :: MATCH (520) 555-5542 :: MATCH (520) 555 5542 :: MATCH 520-555.5542 :: MATCH 520 555-0555 :: MATCH (520)5555542 :: MATCH 520.555-4523 :: MATCH 19991114444 :: FAIL 19995554444 :: MATCH 514 555 1231 :: MATCH 1 555 555 5555 :: MATCH 1.555.555.5555 :: MATCH 1-555-555-5555 :: MATCH 520-555-5542 ext.123 :: MATCH 520.555.5542 EXT 123 :: MATCH 5205555542 Ext. 7712 :: MATCH 520 555 5542 ext 5 :: MATCH 520) 555-5542 :: FAIL (520 555-5542 :: FAIL (520)555-5542 ext .4 :: FAIL (512) 555-1234 ext. 123 :: MATCH 1(555)555-5555 :: MATCH  aer0s 7 years ago  Simple function to return a sub-string following the preg convention. Kind of expensive, and some might say lazy but it has saved me time.# preg_substr($pattern,$subject,[$offset]) function# @author   aer0s#  return a specific sub-string in a string using #   a regular expression # @param   $pattern regular expression pattern to match# @param$subject   string to search# @param   [$offset] zero based match occurrence to return# # [$offset] is 0 by default which returns the first occurrence,# if [$offset] is -1 it will return the last occurrence function preg_substr($pattern,$subject,$offset=0){    preg_match_all($pattern,$subject,$matches,PREG_PATTERN_ORDER); return$offset==-1?array_pop($matches[0]):$matches[0][$offset];} example:$pattern = "/model(\s|-)[a-z0-9]/i";             $subject = "Is there something wrong with model 654, Model 732, and model 43xl or is Model aj45B the preferred choice?"; echo preg_substr($pattern,$subject); echo preg_substr($pattern,$subject,1); echo preg_substr($pattern,$subject,-1); Returns something like: model 654 Model 732 Model aj45B  andre at koethur dot de 6 years ago  Be aware of bug https://bugs.php.net/bug.php?id=50887 when using sub patterns: Un-matched optional sub patterns at the end won't show up in$matches.Here is a workaround: Assign a name to all subpatterns you are interested in, and merge $match afterwards with an constant array containing some reasonable default values:<?phpif (preg_match('/^(?P<lang>[^;*][^;]*){1}(?:;q=(?P<qval>[0-9.]+))?$/u', 'de', $match)){$match = array_merge(array('lang' => '', 'qval' => ''), $match); print_r($match);}?>This outputs:Array(    [lang] => de    [qval] =>     [0] => de    [1] => de)Instead of:Array(    [0] => de    [lang] => de    [1] => de) 
16
splattermania at freenet dot de
10 years ago
 As I wasted lots of time finding a REAL regex for URLs and resulted in building it on my own, I now have found one, that seems to work for all kinds of urls: <?php     $regex = "((https?|ftp)\:\/\/)?"; // SCHEME$regex .= "([a-z0-9+!*(),;?&=\$_.-]+(\:[a-z0-9+!*(),;?&=\$_.-]+)?@)?"; // User and Pass     $regex .= "([a-z0-9-.]*)\.([a-z]{2,3})"; // Host or IP$regex .= "(\:[0-9]{2,5})?"; // Port     $regex .= "(\/([a-z0-9+\$_-]\.?)+)*\/?"; // Path     $regex .= "(\?[a-z+&\$_.-][a-z0-9;:@&%=+\/\$_.-]*)?"; // GET Query$regex .= "(#[a-z_.-][a-z0-9+\$_.-]*)?"; // Anchor ?> Then, the correct way to check against the regex ist as follows: <?php if(preg_match("/^$regex$/",$url))        {                return true;        } ?> 
6 years ago
 Attention! PREG_OFFSET_CAPTURE not UTF-8 aware when using u modifierand it's not a but, it's a feature:https://bugs.php.net/bug.php?id=37391Possible workaround: Use mb_strpos to get the correct offset, instead of the flag. UTF-8 support would be nice. 
12
ian_channing at hotmail dot com
10 years ago
 This is a function that uses regular expressions to match against the various VAT formats required across the EU. <?php /** * @param integer $country Country name * @param integer$vat_number VAT number to test e.g. GB123 4567 89 * @return integer -1 if country not included OR 1 if the VAT Num matches for the country OR 0 if no match */ function checkVatNumber( $country,$vat_number ) {     switch($country) { case 'Austria':$regex = '/^(AT){0,1}U[0-9]{8}$/i'; break; case 'Belgium':$regex = '/^(BE){0,1}[0]{0,1}[0-9]{9}$/i'; break; case 'Bulgaria':$regex = '/^(BG){0,1}[0-9]{9,10}$/i'; break; case 'Cyprus':$regex = '/^(CY){0,1}[0-9]{8}[A-Z]$/i'; break; case 'Czech Republic':$regex = '/^(CZ){0,1}[0-9]{8,10}$/i'; break; case 'Denmark':$regex = '/^(DK){0,1}([0-9]{2}[\ ]{0,1}){3}[0-9]{2}$/i'; break; case 'Estonia': case 'Germany': case 'Greece': case 'Portugal':$regex = '/^(EE|EL|DE|PT){0,1}[0-9]{9}$/i'; break; case 'France':$regex = '/^(FR){0,1}[0-9A-Z]{2}[\ ]{0,1}[0-9]{9}$/i'; break; case 'Finland': case 'Hungary': case 'Luxembourg': case 'Malta': case 'Slovenia':$regex = '/^(FI|HU|LU|MT|SI){0,1}[0-9]{8}$/i'; break; case 'Ireland':$regex = '/^(IE){0,1}[0-9][0-9A-Z\+\*][0-9]{5}[A-Z]$/i'; break; case 'Italy': case 'Latvia':$regex = '/^(IT|LV){0,1}[0-9]{11}$/i'; break; case 'Lithuania':$regex = '/^(LT){0,1}([0-9]{9}|[0-9]{12})$/i'; break; case 'Netherlands':$regex = '/^(NL){0,1}[0-9]{9}B[0-9]{2}$/i'; break; case 'Poland': case 'Slovakia':$regex = '/^(PL|SK){0,1}[0-9]{10}$/i'; break; case 'Romania':$regex = '/^(RO){0,1}[0-9]{2,10}$/i'; break; case 'Sweden':$regex = '/^(SE){0,1}[0-9]{12}$/i'; break; case 'Spain':$regex = '/^(ES){0,1}([0-9A-Z][0-9]{7}[A-Z])|([A-Z][0-9]{7}[0-9A-Z])$/i'; break; case 'United Kingdom':$regex = '/^(GB){0,1}([1-9][0-9]{2}[\ ]{0,1}[0-9]{4}[\ ]{0,1}[0-9]{2})|([1-9][0-9]{2}[\ ]{0,1}[0-9]{4}[\ ]{0,1}[0-9]{2}[\ ]{0,1}[0-9]{3})|((GD|HA)[0-9]{3})$/i'; break; default: return -1; break; } return preg_match($regex, $vat_number); } ?>  10 Kae Cyphet 9 years ago  for those coming over from ereg, preg_match can be quite intimidating. to get started here is a migration tip. <?php if(ereg('[^0-9A-Za-z]',$test_string)) // will be true if characters arnt 0-9, A-Z or a-z. if(preg_match('/[^0-9A-Za-z]/',$test_string)) // this is the preg_match version. the /'s are now required. ?>  skds1433 at hotmail dot com 10 years ago  here is a small tool for someone learning to use regular expressions. it's very basic, and allows you to try different patterns and combinations. I made it to help me, because I like to try different things, to get a good understanding of how things work.<?php$search = isset($_POST['search'])?$_POST['search']:"//";$match = isset($_POST['match'])?$_POST['match']:"<>";echo '<form method="post">';echo 's: <input style="width:400px;" name="search" type="text" value="'.$search.'" /><br />';echo 'm:<input style="width:400px;" name="match" type="text" value="'.$match.'" /><input type="submit" value="go" /></form><br />';if (preg_match($search, $match)){echo "matches";}else{echo "no match";}?>  Anonymous 7 years ago  Here is a function that decreases the numbers inside a string (useful to convert DOM object into simplexml object)e.g.: decremente_chaine("somenode->anode[2]->achildnode[3]") will return "somenode->anode[1]->achildnode[2]"the numbering of the nodes in simplexml starts from zero, but from 1 in DOM xpath objects<?phpfunction decremente_chaine($chaine)    {        //récupérer toutes les occurrences de nombres et leurs indices        preg_match_all("/[0-9]+/",$chaine,$out,PREG_OFFSET_CAPTURE);            //parcourir les occurrences             for($i=0;$i<sizeof($out[0]);$i++)            {                $longueurnombre = strlen((string)$out[0][$i][0]);$taillechaine = strlen($chaine); // découper la chaine en 3 morceaux$debut = substr($chaine,0,$out[0][$i][1]);$milieu = ($out[0][$i][0])-1;                $fin = substr($chaine,$out[0][$i][1]+$longueurnombre,$taillechaine);                 // si c'est 10,100,1000 etc. on décale tout de 1 car le résultat comporte un chiffre de moins                 if(preg_match('#[1][0]+$#',$out[0][$i][0])) { for($j = $i+1;$j<sizeof($out[0]);$j++)                    {                        $out[0][$j][1] = $out[0][$j][1] -1;                    }                 }                $chaine =$debut.$milieu.$fin;            }        return $chaine; }?>  Nimja 7 years ago  When using a 'bad words reject string' filter, preg_match is MUCH faster than strpos / stripos. Because in the other cases, you would need to do a foreach for each word. With efficient programming, the foreach is ONLY faster when the first word in the ban-list is found.(for 12 words, 100,000 iterations, no word found)stripos - Taken 1.4876 seconds.strpos - Taken 1.4207 seconds.preg_match - Taken 0.189 seconds.Interesting fact:With long words ('averylongwordtospitepreg'), the difference is only much less. Only about a 2/3rd of the time instead of 1/6th<?php$words = array('word1', 'word2', 'word3', 'word4', 'word5', 'word6', 'word7', 'word8', 'word9', 'word10', 'word11', 'word12' );$teststring = 'ThIs Is A tEsTsTrInG fOr TeStInG.';$count = 100000;$find = 0;$start = microtime(TRUE);for ($i = 0;$i < $count;$i++) {    foreach ($words as$word) {        if (stripos($teststring,$word) !== FALSE) {            $find++; break; } }}echo 'stripos - Taken ' . round(microtime(TRUE) -$start, 4) . ' seconds.' . PHP_EOL;$start = microtime(TRUE);for ($i = 0; $i <$count; $i++) { foreach ($words as $word) { if (strpos($teststring, $word) !== FALSE) {$find++;            break;        }    }}echo 'strpos - Taken ' . round(microtime(TRUE) - $start, 4) . ' seconds.' . PHP_EOL;$start = microtime(TRUE);$pattern = '/';$div = '';foreach ($words as$word) {    $pattern .=$div . preg_quote($word);$div = '|';}$pattern .= '/i';//Pattern could easily be done somewhere else if words are static.for ($i = 0; $i <$count; $i++) { if (preg_match($pattern, $teststring)) {$find++;    }}$end = microtime(TRUE);echo 'preg_match - Taken ' . round($end - $start, 4) . ' seconds.' . PHP_EOL;?>  cmallabon at homesfactory dot com 8 years ago  Just an interesting note. Was just updating code to replace ereg() with strpos() and preg_match and the thought occured that preg_match() could be optimized to quit early when only searching if a string begins with something, for example<?phpif(preg_match("/^http/",$url)){ //do something}?> vs <?php if(strpos($url, "http") === 0){//do something}?>As I guessed, strpos() is always faster (about 2x) for short strings like a URL but for very long strings of several paragraphs (e.g. a block of XML) when the string doesn't start with the needle preg_match as twice as fast as strpos() as it doesn't scan the entire string.So, if you are searching long strings and expect it to normally be true (e.g. validating XML), strpos() is a much faster BUT if you expect if to often fail, preg_match is the better choice.  ayman2243 at gmail dot com 8 years ago  highlight Search Words <?php function highlight($word, $subject) {$split_subject = explode(" ", $subject);$split_word = explode(" ", $word); foreach ($split_subject as $k =>$v){            foreach ($split_word as$k2 => $v2){ if($v2 == $v){$split_subject[$k] = "<span class='highlight'>".$v."</span>";                               }            }       }             return implode(' ', $split_subject); } ?>  Jonny 5 7 years ago  Workaround for getting the offset in UTF-8 (in some cases mb_strpos might be an option as well) <?php if(preg_match($pattern,$haystack,$out,PREG_OFFSET_CAPTURE)) {     $offset = strlen(utf8_decode(substr($haystack,0,$out[0][1]))); } ?>  matt 10 years ago  To support large Unicode ranges (ie: [\x{E000}-\x{FFFD}] or \x{10FFFFF}) you must use the modifier '/u' at the end of your expression.  wjaspers4 [at] gmail [dot] com 10 years ago  I recently encountered a problem trying to capture multiple instances of named subpatterns from filenames.Therefore, I came up with this function.The function allows you to pass through flags (in this version it applies to all expressions tested), and generates an array of search results.Enjoy!<?php/** * Allows multiple expressions to be tested on one string. * This will return a boolean, however you may want to alter this. * * @author William Jaspers, IV <wjaspers4@gmail.com> * @created 2009-02-27 17:00:00 +6:00:00 GMT * @access public * * @param array$patterns An array of expressions to be tested. * @param String $subject The data to test. * @param array$findings Optional argument to store our results. * @param mixed $flags Pass-thru argument to allow normal flags to apply to all tested expressions. * @param array$errors A storage bin for errors * * @returns bool Whether or not errors occurred. */function preg_match_multiple(   array $patterns=array(),$subject=null,  &$findings=array(),$flags=false,  &$errors=array()) { foreach($patterns as $name =>$pattern )  {    if( 1 <= preg_match_all( $pattern,$subject, $found,$flags ) )    {      $findings[$name] = $found; } else { if( PREG_NO_ERROR !== ($code = preg_last_error() ))      {        $errors[$name] = $code; } else$findings[$name] = array(); } } return (0===sizeof($errors));}?> 
SoN9ne at gmail dot com
9 years ago
 I have been working on a email system that will automatically generate a text email from a given HTML email by using strip_tags(). The only issue I ran into, for my needs, were that the anchors would not keep their links. I search for a little while and could not find anything to strip the links from the tags so I generated my own little snippet. I am posting it here in hopes that others may find it useful and for later reference.A note to keep in mind:I was primarily concerned with valid HTML so if attributes do no use ' or " to contain the values then this will need to be tweaked.If you can edit this to work better, please let me know.<?php/** * Replaces anchor tags with text * - Will search string and replace all anchor tags with text (case insensitive) * * How it works: * - Searches string for an anchor tag, checks to make sure it matches the criteria *         Anchor search criteria: *             - 1 - <a (must have the start of the anchor tag ) *             - 2 - Can have any number of spaces or other attributes before and after the href attribute *             - 3 - Must close the anchor tag * * - Once the check has passed it will then replace the anchor tag with the string replacement * - The string replacement can be customized * * Know issue: * - This will not work for anchors that do not use a ' or " to contain the attributes. *         (i.e.- <a href=http: //php.net>PHP.net</a> will not be replaced) */function replaceAnchorsWithText($data) { /** * Had to modify$regex so it could post to the site... so I broke it into 6 parts.     */    $regex = '/(<a\s*'; // Start of anchor tag$regex .= '(.*?)\s*'; // Any attributes or spaces that may or may not exist    $regex .= 'href=[\'"]+?\s*(?P<link>\S+)\s*[\'"]+?'; // Grab the link$regex .= '\s*(.*?)\s*>\s*'; // Any attributes or spaces that may or may not exist before closing tag     $regex .= '(?P<name>\S+)'; // Grab the name$regex .= '\s*<\/a>)/i'; // Any number of spaces between the closing anchor tag (case insensitive)        if (is_array($data)) { // This is what will replace the link (modify to you liking)$data = "{$data['name']}({$data['link']})";    }    return preg_replace_callback($regex, 'replaceAnchorsWithText',$data);}$input = 'Test 1: <a href="http: //php.net1">PHP.NET1</a>.<br />';$input .= 'Test 2: <A name="test" HREF=\'HTTP: //PHP.NET2\' target="_blank">PHP.NET2</A>.<BR />';$input .= 'Test 3: <a hRef=http: //php.net3>php.net3</a><br />';$input .= 'This last line had nothing to do with any of this';echo replaceAnchorsWithText($input).'<hr/>';?>Will output:Test 1: PHP.NET1(http: //php.net1).Test 2: PHP.NET2(HTTP: //PHP.NET2).Test 3: php.net3 (is still an anchor)This last line had nothing to do with any of thisPosting to this site is painful...Had to break up the regex and had to break the test links since it was being flagged as spam...  danielrydell at gmail dot com 2 years ago  When trying to match accented characters, such as those found in Spanish, there seems to be a different internal interpretation when using character classes. So the best way is to add the u option (for unicode) after the delimiters.<?php//echoes 1 (adding u would not alter the result)echo preg_match('/^áéíóúñ$/', 'áéíóúñ');//echoes 0 (unless with [ó]+ or [ó]* or adding u)echo preg_match('/^áéí[ó]úñ$/', 'áéíóúñ');//so to match 'espana' or 'españa', add u or this won't match//echoes 1echo preg_match('/^espa[nñ]a$/u', 'españa');?> 
itworkarounds at gmail dot com
8 years ago
 You can use the following code to detect non-latin (Cyrilic, Arabic, Greek...) characters: <?php preg_match("/^[a-zA-Z\p{Cyrillic}0-9\s\-]+$/u", "ABC abc 1234 АБВ абв"); ?>  phil dot taylor at gmail dot com 10 years ago  If you need to check for .com.br and .com.au and .uk and all the other crazy domain endings i found the following expression works well if you want to validate an email address. Its quite generous in what it will allow <?php$email_address = "phil.taylor@a_domain.tv";     if (preg_match("/^[^@]*@[^@]*\.[^@]*$/",$email_address)) {         return "E-mail address";            }         ?> 
Anonymous
9 years ago
 The regular expression for breaking-down a URI reference into its components:      ^(([^:/?#]+):)?(//([^/?#]*))?([^?#]*)(\?([^#]*))?(#(.*))?       12            3  4          5       6  7        8 9Source: ietf.org/rfc/rfc2396.txt 
geompse at gmail dot com
2 years ago
 The function will return false and raise a warning if the input $subject is too long :[PhpWarning] preg_match(): Subject is too longI believe the limit is 1 or 2 GB because I was using a 2.2GB string.While a parameter might exist to alter this limit, in my case it was possible and wiser to use <500MB strings instead.  plasma 9 years ago  To extract scheme, host, path, ect. simply use <?php$url  = 'http://name:pass@';   $url .= 'example.com:10000';$url .= '/path/to/file.php?a=1&amp;b=2#anchor';   $url_data = parse_url ($url );   print_r ( $url_data ); ?> ___ prints out something like: Array ( [scheme] => http [host] => wild.subdomain.orgy.domain.co.uk [port] => 10000 [user] => name [pass] => pass [path] => /path/to/file.php [query] => a=1&b=2 [fragment] => anchor ) In my tests parse_url is up to 15x faster than preg_match(_all)!  workhorse at op dot pl 8 years ago  Preg_match returns empty result trying to validate$subject with carriege returns (/n/r).To solve it one need to use /s modifier in $pattern string.<?php$pattern='/.*/s';$valid=preg_match($pattern, $subject,$match);?> 
Frank
8 years ago
 If someone is from a country that accepts decimal numbers in format 9.00 and 9,00 (point or comma), number validation would be like that:<?php$number_check = "9,99";if (preg_match( '/^[\-+]?[0-9]*\.*\,?[0-9]+$/', $number_check)) { return TRUE; }?>However, if the number will be written in the database, most probably this comma needs to be replaced with a dot. This can be done with use of str_replace, i.e :<?php$number_database = str_replace("," , "." , $number_check);?>  jphansen at uga dot edu 7 years ago  Here's a regex to validate against the schema for common MySQL identifiers: <?php$string = "$table_name"; if (preg_match("/[^\\d\\sa-zA-Z$_]/", $string)) echo "Failed validation"; ?>  Stefan 9 years ago  I spent a while replacing all my ereg() calls to preg_match(), since ereg() is now deprecated and will not be supported as of v 6.0. Just a warning regarding the conversion, the two functions behave very similarly, but not exactly alike. Obviously, you will need to delimit your pattern with '/' or '|' characters. The difference that stumped me was that preg_replace overwrites the$matches array regardless if a match was found. If no match was found, $matches is simply empty. ereg(), however, would leave$matches alone if a match was not found. In my code, I had repeated calls to ereg, and was populating $matches with each match. I was only interested in the last match. However, with preg_match, if the very last call to the function did not result in a match, the$matches array would be overwritten with a blank value. Here is an example code snippet to illustrate: <?php $test = array('yes','no','yes','no','yes','no'); foreach ($test as $key=>$value) {   ereg("yes",$value,$matches1);   preg_match("|yes|",$value,$matches2); }   print "ereg result: $matches1[0]<br>"; print "preg_match result:$matches2[0]<br>"; ?> The output is: ereg result: yes preg_match result: ($matches2[0] in this case is empty) I believe the preg_match behavior is cleaner. I just thought I would report this to hopefully save others some time.  marcosc at tekar dot net 10 years ago  When using accented characters and "ñ" (áéíóúñ), preg_match does not work. It is a charset problem, use utf8_decode/decode to fix.  teracci2002 9 years ago  When you use preg_match() for security purpose or huge data processing,mayby you should make consideration for backtrack_limit and recursion_limit.http://www.php.net/manual/en/pcre.configuration.phpThese limits may bring wrong matching result.You can verify whether you hit these limits by checking preg_last_error().http://www.php.net/manual/en/function.preg-last-error.php  chat dot noir at arcor dot de 2 years ago  Note that if a parenthesed group is not matched, its key may or may not be present in$matches. For instance,<?php preg_match('/(foo)?(bar)?(baz)?/', 'bar', $matches);print_r($matches); // outputs// Array// (//     [0] => bar//     [1] => //     [2] => bar// )?>Note that there is no element with key '3' in $matches, but an element with key '1' (the empty string). This inconsistent behavior also applies to named groups.  sun at drupal dot org 8 years ago  Basic test for invalid UTF-8 that can hi-jack IE:<?php$valid = (preg_match('/^./us', $text) == 1);?>See http://api.drupal.org/api/drupal/includes--bootstrap.inc/function/drupal_validate_utf8/7 for details.---Test for valid UTF-8 and XML/XHTML character range compatibility:<?php$invalid = preg_match('@[^\x9\xA\xD\x20-\x{D7FF}\x{E000}-\x{FFFD}\x{10000}-\x{10FFFF}]@u', \$text)?>Ref: http://www.w3.org/TR/2000/REC-xml-20001006#charsets